for further information contact your local stmicroelectronics sales office. july 2013 docid024971 rev 1 1/4 STEVAL-MKI137V1 lis3mdl adapter board for standard dil24 socket data brief features ? complete lis3mdl pinout for a standard dil 24 socket ? fully compatible with steval-mki109v2 motherboard ? rohs compliant description the STEVAL-MKI137V1 is an adapter board designed to facilitate the evaluation of mems devices in the lis3mdl product family. the board offers an effective solution for fast system prototyping and device evaluation directly within the user?s own application. the STEVAL-MKI137V1 can be plugged into a standard dil 24 socket. the adapter provides the complete lis3mdl pinout and comes ready-to- use with the required decoupling capacitors on the vdd power supply line. this adapter is supported by steval-mki109v2: it is a motherboard including a high-performance 32-bit microcontroller which functions as a bridge between the sensor and a pc, on which it is possible to use the downloadable graphical user interface (unico gui), or dedicated software routines for customized applications. STEVAL-MKI137V1 www.st.com
schematic diagram STEVAL-MKI137V1 2/4 docid024971 rev 1 1 schematic diagram figure 1. STEVAL-MKI137V1 schematic circuit sdo vdd scl sda vdd _io c1 10 0nf 1 10 2 3 4 5 6 7 8 9 11 12 jp1 1 header 12 9 8 7 6 5 4 3 2 10 11 12 jp2 header 12 vdd 10 uf c2 cs int1 9 sdo cs 10 sda 11 res 12 5 vd d c1 4 3 gn d 2 res 1 scl 6 vd d_ io 7 int1 8 drdy u1 dal las c3 10 0nf vdd scl sda cs sdo drdy int1 vd d_ io drdy 0 r1 0 r2 vdd t1 t1 nc am17534v1
docid024971 rev 1 3/4 STEVAL-MKI137V1 revision history 4 2 revision history table 1. document revision history date revision changes 08-jul-2013 1 initial release.
STEVAL-MKI137V1 4/4 docid024971 rev 1 please read carefully: information in this document is provided solely in connection with st products. stmicroelectronics nv and its subsidiaries (?st ?) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described he rein at any time, without notice. all st products are sold pursuant to st?s terms and conditions of sale. purchasers are solely responsible for the choice, selection and use of the st products and services described herein, and st as sumes no liability whatsoever relating to the choice, selection or use of the st products and services described herein. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. i f any part of this document refers to any third party products or services it shall not be deemed a license grant by st for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoev er of such third party products or services or any intellectual property contained therein. unless otherwise set forth in st?s terms and conditions of sale st disclaims any express or implied warranty with respect to the use and/or sale of st products including without limitation implied warranties of merchantability, fitness for a particular purpose (and their equivalents under the laws of any jurisdiction), or infringement of any patent, copyright or other intellectual property right. st products are not authorized for use in weapons. nor are st products designed or authorized for use in: (a) safety critical applications such as life supporting, active implanted devices or systems with product functional safety requirements; (b) aeronautic applications; (c) automotive applications or environments, and/or (d) aerospace applications or environments. where st products are not designed for such use, the purchaser shall use products at purchaser?s sole risk, even if st has been informed in writing of such usage, unless a product is expressly designated by st as being intended for ?automotive, automotive safety or medical? industry domains according to st product design specifications. products formally escc, qml or jan qualified are deemed suitable for use in aerospace by the corresponding governmental agency. resale of st products with provisions different from the statem ents and/or technical features set forth in this document shall immediately void any warranty granted by st for the st product or service described herein and shall not create or extend in any manner whatsoev er, any liability of st. st and the st logo are trademarks or register ed trademarks of st in various countries. information in this document supersedes and replaces all information previously supplied. the st logo is a registered trademark of stmicroelectronics. all other names are the property of their respective owners. ? 2013 stmicroelectronics - all rights reserved stmicroelectronics group of companies australia - belgium - brazil - canada - china - czech republic - finland - france - germany - hong kong - india - israel - ital y - japan - malaysia - malta - morocco - philippines - singapore - spain - swed en - switzerland - united kingdom - united states of america www.st.com
|
